Paints and Coatings at Adams Paint Company

Our brand APCO consists of a broad range of products from highly durable industrial coatings, cost effective alkyd enamels and primers, high performance acrylic polyurethanes to 100% solids epoxy and polyurea. Use the categories below to browse through the paints and coatings at Adams Paint Company.

550 Polyester Flake Lining

Product Overview APCO 550 Polyester Flake Lining is a two component flake filled isophthalic polyester internal lining. The inert flake pigments create a reinforced overlapping structure that is extremely impermeable....

290 High Temperature Silicone

APCO 290 High Temperature Silicone is an alkyd used to protect the exterior of equipment exposed to medium to high temperatures. Can be used on steampipes, engines, stacks, heat exchangers and other equipment.

265Z HAPS Free Universal Primer

APCO 265Z is a HAPS free, high solids, fast drying, non-lifting universal alkyd primer. Provides tight barrier protection to properly prepared steel surfaces. Formulated with exempt solvents to ensure compliance with strict air quality regulations. Can be used under high performance topcoats containing hot keytone solvents. Can also be used as a barrier coat over conventional coatings that would normally be attacked by stronger solvents.

260S Low VOC Satin Alkyd

High solids, fast drying, thin film, low VOC coating. Provides tight barrier protection to properly prepared steel surfaces. High solids formulation and use of exempt solvents results in lower VOC emissions. Economical way to comply with stricter air quality regulations. Attractive satin finish helps hide imperfections in the surface.

260 Low VOC Quick Dry Alkyd

High solids, fast drying, thin film, low VOC coating. Provides tight barrier protection to properly prepared steel surfaces. High solids formulation and use of exempt solvents results in lower VOC emissions. Economical way to comply with stricter air quality regulations.

255 Epoxy Ester Primer

APCO 255 Epoxy Ester Primer fast drying single part epoxy ester primer. Provides tight barrier protection to properly prepared steel surfaces. Provides increased chemical resistance compared to conventional alkyds. 255 is specifically formulated for use on electrical transformers, but may also be used anywhere increased chemical resistance is desired.

250 Low VOC Quick Dry Alkyd

High solids, fast drying, thin film, low VOC coating. Provides tight barrier protection to properly prepared steel surfaces. High solids formulation and use of exempt solvents results in lower VOC emissions. Economical way to comply with stricter air quality regulations.

245FP Universal Primer

APCO 245FP is a proven, fast drying, thin film, non-lifting universal alkyd primer. Provides tight barrier protection to properly prepared steel surfaces. Quick dry times ensure high production rates and limited bottlenecks in the paint booth. Can be used under high performance topcoats containing hot keytone solvents. Can also be used as a barrier coat over conventional coatings that would normally be attacked by stronger solvents.

220M OEM Matte Finish Enamel

APCO 220M is a proven, fast drying, thin film, economical coating. Provides tight barrier protection to properly prepared steel surfaces. Quick dry time ensure high production rates and limited bottlenecks in the paint booth.

220 OEM Quick Dry Alkyd

APCO 220 is a proven, fast drying, thin film, economical coating. Provides tight barrier protection to properly prepared steel surfaces. Quick dry time ensure high production rates and limited bottlenecks in the paint booth. Available in a wide range of factory colors and almost limitless range of tinted colors.

215QP Quick Dry Primer

APCO 215QP is a proven, fast drying, thin film, economical alkyd primer. Provides tight barrier protection to properly prepared steel surfaces. Quick dry time ensure high production rates and limited bottlenecks in the paint booth.

205 Industrial Primer

APCO 205 is a proven, thin film, economical metal primer. Provides tight barrier protection to properly prepared steel surfaces. User friendly application, can be applied with brush, roller or spray.

950 Aromatic Polyurea

APCO 950 is a 100% solids, fast setting pure polyurea elastomer coating. 950 forms an extremely tough, abrasion and chemical resistant monolithic barrier on properly prepared steel, concrete or geo-textile. APCO 950 is pure polyurea, fast setting and can be applied in temperatures as low as 0°F. Film thicknesses of over 250 mils are quickly and easily achieved.

399 Phenolic Epoxy Tank Lining

APCO 399 is a 100% solids, high build, phenolic modified cycloaliphatic amine epoxy. 399 forms a highly cross linked chemical resistant monolithic barrier on properly prepared steel or concrete surfaces. Specifically engineered for immersion service in petrochemical storage tanks, hot crude oil tanks, vessels, and produced water tanks. 399 is a single coat system that is applied using heated plural component airless spray which reduces costly man hours and greatly increases production rates. Plural-component mix on demand spraying dramatically reduces paint waste and ensures on ratio product delivery and avoids costly reworks due to human error.

359 Novolac Epoxy Lining

APCO 359 is a multifunctional highly cross linked novolac epoxy tank lining. When applied over properly prepared surfaces it exhibits superior adhesion and corrosion resistance. 359 is self priming and an excellent choice for steel or concrete structures where extreme chemical and temperature resistance is required. Formulated with inert pigments and industry leading resins and curing agents. 359 is specifically engineered for immersion protection in hot crude oil tanks, process vessels and frac tanks.

357 Phenolic Epoxy Tank Lining

APCO 357 is a high solids, high build, two component amine epoxy lining. When applied over properly prepared surfaces it exhibits excellent adhesion and corrosion resistance. 357 is self priming and an excellent choice for steel or concrete structures where chemical and temperature resistance is required. Formulated with inert pigments and industry leading resins and curing agents, 357 is specifically engineered for immersion protection in produced water tanks, hot crude oil tanks and process vessels.

355 Fire Tube Coating

APCO 355 is used to extend the service life of immersed fire tube boilers in the oil & gas industry. Engineered to provide a hard, anti-corrosive, temperature and chemical resistant finish. 355 is self priming and well suited for both immersion and non-immersion service. 355 is formulated with highly inert pigments and the highest performing resins and cures in the industry.

351 Epoxy Primer

APCO 351 is a two component, high solids, corrosion inhibitive epoxy primer. When applied over properly prepared surfaces it exhibits excellent adhesion and corrosion resistance. Formulated to achieve outstanding intercoat adhesion with urethane enamels such as APCO 400HS and APCO 427. Excellent for fixed and mobile equipment where a long lasting durable yet economical coating is required.

329HB High Build Epoxy Lining

APCO 329HB is a high solids, high build, two component amine epoxy lining. When applied over properly prepared surfaces it exhibits excellent adhesion and corrosion resistance. 329HB Epoxy is self priming and an excellent choice for steel or concrete structures where increased chemical resistance is required. Formulated with inert pigments and industry leading resins and curing agents, 329HB is specifically engineered for immersion protection in produced water tanks, hot crude oil tanks and process vessels.

318MP Industrial Epoxy Coating

APC0 318MP is a high solids, high build, two component corrosion inhibiting epoxy coating. When applied over properly prepared surfaces is exhibits excellent adhesion and corrosion resistance. 318MP Epoxy is self priming and a good choice for steel or concrete structures where increased chemical resistance is required. Formulated with inert pigments and industry standard resins, 318MP provides excellent immersion protection against a variety of oil and gas environments.

720S Water Reducible Alkyd

APCO 720S Water Reducible Alkyd is a fast drying, semi-gloss, coating. Available in a wide range of factory colors. Forms a tight high gloss enamel finish that provides barrier protection to properly prepared steel surfaces. VOC compliant and HAPS free formulation helps meet strict air quality regulations.

720 Water Reducible Alkyd

APCO 720 Water Reducible Alkyd is a fast drying, high gloss, coating. Available in a wide range of factory colors. Forms a tight high gloss enamel finish that provides barrier protection to properly prepared steel surfaces. VOC compliant and HAPS free formulation helps meet strict air quality regulations.

715AP Water Reducible Primer

APCO 715AP Water Reducible Primer is a fast drying, HAPS free, corrosion resistant primer. Provides tight barrier protection to properly prepared steel surfaces. VOC compliant and HAPS free formulation helps meet strict air quality regulations.

427 Acrylic Urethane Enamel

APC0 427 is a high gloss, two part acrylic urethane enamel. It has excellent color and gloss retention properties and very fast dry times. 427 is a excellent and economical choice for high production environments. Available in a wide range of colors.

400HS Polyurethane Enamel

APC0 400HS is a high solids, high gloss, two part acrylic polyurethane enamel. It has superior color and gloss retention properties, and also has very good splash and spill chemical resistance. 400HS is an excellent choice for oil and gas tanks, storage vessels, transports and a variety of other equipment where a highly durable finish is required.

231 Fast Dry Acrylic

APCO 231 Fast dry Acrylic is a solution acrylic enamel. Very fast dry times are possible with APCO 231. Provides tight barrier protection to properly prepared steel surfaces. Attractive semi-gloss finish helps hide imperfections. Formulated for use on power transmission equipment.

300 Polyamide Epoxy Coating

APC0 300 is an economical two component corrosion inhibiting epoxy coating. When applied over properly prepared surfaces is exhibits excellent adhesion and very good corrosion resistance. 300 Epoxy is self priming and a good choice for steel or concrete structures where increased chemical resistance is required. Formulated with inert and industry standard resins, 300 provides excellent immersion protection against a variety of water solutions.

202 Industrial Aluminum Paint

APCO 202 is a varnish based, thin film, economical aluminum paint. Provides tight barrier protection to properly prepared steel surfaces. User friendly application, can be applied with brush, roller or spray.

201F Industrial Flat Finish

APCO 201F Industrial Flat Finish is a thin film, economical coating. Provides attractive flat finish to properly prepared steel surfaces. User friendly application, can be applied with brush, roller or spray. Primarily a decorative indoor finish, not intended to provide long term protection to out door steel surfaces. Can also be used as a black primer under 201 Industrial Enamel.

201 Industrial Enamel

APCO 201 is a proven, thin film, economical coating. Provides tight barrier protection to properly prepared steel surfaces. User friendly application, can be applied with brush, roller or spray. Available in a wide range of factory colors and almost limitless range of tinted colors.

290 High Temperature Silicone

APCO 290 High Temperature Silicone is an alkyd used to protect the exterior of equipment exposed to medium to high temperatures. Can be used on steampipes, engines, stacks, heat exchangers and other equipment.

265Z HAPS Free Universal Primer

APCO 265Z is a HAPS free, high solids, fast drying, non-lifting universal alkyd primer. Provides tight barrier protection to properly prepared steel surfaces. Formulated with exempt solvents to ensure compliance with strict air quality regulations. Can be used under high performance topcoats containing hot keytone solvents. Can also be used as a barrier coat over conventional coatings that would normally be attacked by stronger solvents.

260S Low VOC Satin Alkyd

High solids, fast drying, thin film, low VOC coating. Provides tight barrier protection to properly prepared steel surfaces. High solids formulation and use of exempt solvents results in lower VOC emissions. Economical way to comply with stricter air quality regulations. Attractive satin finish helps hide imperfections in the surface.

260 Low VOC Quick Dry Alkyd

High solids, fast drying, thin film, low VOC coating. Provides tight barrier protection to properly prepared steel surfaces. High solids formulation and use of exempt solvents results in lower VOC emissions. Economical way to comply with stricter air quality regulations.

255 Epoxy Ester Primer

APCO 255 Epoxy Ester Primer fast drying single part epoxy ester primer. Provides tight barrier protection to properly prepared steel surfaces. Provides increased chemical resistance compared to conventional alkyds. 255 is specifically formulated for use on electrical transformers, but may also be used anywhere increased chemical resistance is desired.

250 Low VOC Quick Dry Alkyd

High solids, fast drying, thin film, low VOC coating. Provides tight barrier protection to properly prepared steel surfaces. High solids formulation and use of exempt solvents results in lower VOC emissions. Economical way to comply with stricter air quality regulations.

245FP Universal Primer

APCO 245FP is a proven, fast drying, thin film, non-lifting universal alkyd primer. Provides tight barrier protection to properly prepared steel surfaces. Quick dry times ensure high production rates and limited bottlenecks in the paint booth. Can be used under high performance topcoats containing hot keytone solvents. Can also be used as a barrier coat over conventional coatings that would normally be attacked by stronger solvents.

220M OEM Matte Finish Enamel

APCO 220M is a proven, fast drying, thin film, economical coating. Provides tight barrier protection to properly prepared steel surfaces. Quick dry time ensure high production rates and limited bottlenecks in the paint booth.

220 OEM Quick Dry Alkyd

APCO 220 is a proven, fast drying, thin film, economical coating. Provides tight barrier protection to properly prepared steel surfaces. Quick dry time ensure high production rates and limited bottlenecks in the paint booth. Available in a wide range of factory colors and almost limitless range of tinted colors.

215QP Quick Dry Primer

APCO 215QP is a proven, fast drying, thin film, economical alkyd primer. Provides tight barrier protection to properly prepared steel surfaces. Quick dry time ensure high production rates and limited bottlenecks in the paint booth.

205 Industrial Primer

APCO 205 is a proven, thin film, economical metal primer. Provides tight barrier protection to properly prepared steel surfaces. User friendly application, can be applied with brush, roller or spray.

202 Industrial Aluminum Paint

APCO 202 is a varnish based, thin film, economical aluminum paint. Provides tight barrier protection to properly prepared steel surfaces. User friendly application, can be applied with brush, roller or spray.

201F Industrial Flat Finish

APCO 201F Industrial Flat Finish is a thin film, economical coating. Provides attractive flat finish to properly prepared steel surfaces. User friendly application, can be applied with brush, roller or spray. Primarily a decorative indoor finish, not intended to provide long term protection to out door steel surfaces. Can also be used as a black primer under 201 Industrial Enamel.

201 Industrial Enamel

APCO 201 is a proven, thin film, economical coating. Provides tight barrier protection to properly prepared steel surfaces. User friendly application, can be applied with brush, roller or spray. Available in a wide range of factory colors and almost limitless range of tinted colors.

399 Phenolic Epoxy Tank Lining

APCO 399 is a 100% solids, high build, phenolic modified cycloaliphatic amine epoxy. 399 forms a highly cross linked chemical resistant monolithic barrier on properly prepared steel or concrete surfaces. Specifically engineered for immersion service in petrochemical storage tanks, hot crude oil tanks, vessels, and produced water tanks. 399 is a single coat system that is applied using heated plural component airless spray which reduces costly man hours and greatly increases production rates. Plural-component mix on demand spraying dramatically reduces paint waste and ensures on ratio product delivery and avoids costly reworks due to human error.

359 Novolac Epoxy Lining

APCO 359 is a multifunctional highly cross linked novolac epoxy tank lining. When applied over properly prepared surfaces it exhibits superior adhesion and corrosion resistance. 359 is self priming and an excellent choice for steel or concrete structures where extreme chemical and temperature resistance is required. Formulated with inert pigments and industry leading resins and curing agents. 359 is specifically engineered for immersion protection in hot crude oil tanks, process vessels and frac tanks.

357 Phenolic Epoxy Tank Lining

APCO 357 is a high solids, high build, two component amine epoxy lining. When applied over properly prepared surfaces it exhibits excellent adhesion and corrosion resistance. 357 is self priming and an excellent choice for steel or concrete structures where chemical and temperature resistance is required. Formulated with inert pigments and industry leading resins and curing agents, 357 is specifically engineered for immersion protection in produced water tanks, hot crude oil tanks and process vessels.

355 Fire Tube Coating

APCO 355 is used to extend the service life of immersed fire tube boilers in the oil & gas industry. Engineered to provide a hard, anti-corrosive, temperature and chemical resistant finish. 355 is self priming and well suited for both immersion and non-immersion service. 355 is formulated with highly inert pigments and the highest performing resins and cures in the industry.

351 Epoxy Primer

APCO 351 is a two component, high solids, corrosion inhibitive epoxy primer. When applied over properly prepared surfaces it exhibits excellent adhesion and corrosion resistance. Formulated to achieve outstanding intercoat adhesion with urethane enamels such as APCO 400HS and APCO 427. Excellent for fixed and mobile equipment where a long lasting durable yet economical coating is required.

329HB High Build Epoxy Lining

APCO 329HB is a high solids, high build, two component amine epoxy lining. When applied over properly prepared surfaces it exhibits excellent adhesion and corrosion resistance. 329HB Epoxy is self priming and an excellent choice for steel or concrete structures where increased chemical resistance is required. Formulated with inert pigments and industry leading resins and curing agents, 329HB is specifically engineered for immersion protection in produced water tanks, hot crude oil tanks and process vessels.

318MP Industrial Epoxy Coating

APC0 318MP is a high solids, high build, two component corrosion inhibiting epoxy coating. When applied over properly prepared surfaces is exhibits excellent adhesion and corrosion resistance. 318MP Epoxy is self priming and a good choice for steel or concrete structures where increased chemical resistance is required. Formulated with inert pigments and industry standard resins, 318MP provides excellent immersion protection against a variety of oil and gas environments.

300 Polyamide Epoxy Coating

APC0 300 is an economical two component corrosion inhibiting epoxy coating. When applied over properly prepared surfaces is exhibits excellent adhesion and very good corrosion resistance. 300 Epoxy is self priming and a good choice for steel or concrete structures where increased chemical resistance is required. Formulated with inert and industry standard resins, 300 provides excellent immersion protection against a variety of water solutions.

427 Acrylic Urethane Enamel

APC0 427 is a high gloss, two part acrylic urethane enamel. It has excellent color and gloss retention properties and very fast dry times. 427 is a excellent and economical choice for high production environments. Available in a wide range of colors.

400HS Polyurethane Enamel

APC0 400HS is a high solids, high gloss, two part acrylic polyurethane enamel. It has superior color and gloss retention properties, and also has very good splash and spill chemical resistance. 400HS is an excellent choice for oil and gas tanks, storage vessels, transports and a variety of other equipment where a highly durable finish is required.

550 Polyester Flake Lining

Product Overview APCO 550 Polyester Flake Lining is a two component flake filled isophthalic polyester internal lining. The inert flake pigments create a reinforced overlapping structure that is extremely impermeable....

950 Aromatic Polyurea

APCO 950 is a 100% solids, fast setting pure polyurea elastomer coating. 950 forms an extremely tough, abrasion and chemical resistant monolithic barrier on properly prepared steel, concrete or geo-textile. APCO 950 is pure polyurea, fast setting and can be applied in temperatures as low as 0°F. Film thicknesses of over 250 mils are quickly and easily achieved.

720S Water Reducible Alkyd

APCO 720S Water Reducible Alkyd is a fast drying, semi-gloss, coating. Available in a wide range of factory colors. Forms a tight high gloss enamel finish that provides barrier protection to properly prepared steel surfaces. VOC compliant and HAPS free formulation helps meet strict air quality regulations.

720 Water Reducible Alkyd

APCO 720 Water Reducible Alkyd is a fast drying, high gloss, coating. Available in a wide range of factory colors. Forms a tight high gloss enamel finish that provides barrier protection to properly prepared steel surfaces. VOC compliant and HAPS free formulation helps meet strict air quality regulations.

715AP Water Reducible Primer

APCO 715AP Water Reducible Primer is a fast drying, HAPS free, corrosion resistant primer. Provides tight barrier protection to properly prepared steel surfaces. VOC compliant and HAPS free formulation helps meet strict air quality regulations.

231 Fast Dry Acrylic

APCO 231 Fast dry Acrylic is a solution acrylic enamel. Very fast dry times are possible with APCO 231. Provides tight barrier protection to properly prepared steel surfaces. Attractive semi-gloss finish helps hide imperfections. Formulated for use on power transmission equipment.